差别

这里会显示出您选择的修订版和当前版本之间的差别。

--- entware:armv7 [2020/12/24 23:46] – [设置环境变量] ubuntu-20.10 Hshh
+++ entware:armv7 [2021/08/04 06:36] (当前版本) – 增加手动编译 openssl-1.1.1k 和 tinc-1.1pre18 Hshh
@@ 行 54: / 行 54: @@
 CC=arm-openwrt-linux-gnueabi-gcc \
 CPP='arm-openwrt-linux-gnueabi-gcc -E' \
-CFLAGS='-O2 -pipe -march=armv7-a -mtune=cortex-a9 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=soft -fPIC' \
+CFLAGS='-O2 -pipe -mtune=cortex-a9 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=soft -fPIC' \
-CPPFLAGS='-I/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/include -I/opt/entware/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-7.4.0_glibc-2.23_eabi/include' \
+CPPFLAGS='-I/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/include -I/opt/entware/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-8.4.0_glibc-2.23_eabi/include' \
-LDFLAGS='-L/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/lib -Wl,-rpath,/opt/lib -Wl,-rpath-link=/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/lib -Wl,--dynamic-linker=/opt/lib/ld-linux.so.3 -L/opt/entware/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-7.4.0_glibc-2.23_eabi/lib'
+LDFLAGS='-L/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/lib -Wl,-rpath,/opt/lib -Wl,-rpath-link=/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/lib -Wl,--dynamic-linker=/opt/lib/ld-linux.so.3 -L/opt/entware/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-8.4.0_glibc-2.23_eabi/lib'
 </code>
@@ 行 81: / 行 81: @@
 CC=arm-openwrt-linux-gnueabi-gcc \
 CPP='arm-openwrt-linux-gnueabi-gcc -E' \
-CFLAGS='-O2 -pipe -march=armv7-a -mtune=cortex-a9 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=soft -fPIC' \
+CFLAGS='-O2 -pipe -mtune=cortex-a9 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=soft -fPIC' \
-CPPFLAGS='-I/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/include -I/opt/entware/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-7.4.0_glibc-2.23_eabi/include' \
+CPPFLAGS='-I/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/include -I/opt/entware/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-8.4.0_glibc-2.23_eabi/include' \
-LDFLAGS='-L/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/lib -Wl,-rpath,/opt/lib -Wl,-rpath-link=/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/lib -Wl,--dynamic-linker=/opt/lib/ld-linux.so.3 -L/opt/entware/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-7.4.0_glibc-2.23_eabi/lib'
+LDFLAGS='-L/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/lib -Wl,-rpath,/opt/lib -Wl,-rpath-link=/opt/entware/Entware/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/lib -Wl,--dynamic-linker=/opt/lib/ld-linux.so.3 -L/opt/entware/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-8.4.0_glibc-2.23_eabi/lib'
 make
+</code>
+=== 编译 openssl-1.1.1k tinc-1.1pre18 ===
+由于 entware 自带的 openssl 没法正常编译 tinc-1.1pre18, 所以需要自己编译
+<code>
+./Configure \
+linux-armv4 shared \
+--prefix=/opt/openssl \
+--cross-compile-prefix="arm-openwrt-linux-gnueabi-" -fPIC \
+-I/opt/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-8.4.0_glibc-2.23_eabi/include \
+-Wl,--dynamic-linker=/opt/lib/ld-linux.so.3 \
+-Wl,-rpath=/opt/openssl/lib \
+-Wl,-rpath=/opt/lib \
+-L/opt/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-8.4.0_glibc-2.23_eabi/lib \
+-Wl,--gc-sections
+</code>
+<code>
+# make CFLAGS='-O2 -pipe -mtune=cortex-a9 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=soft -DPIC -fpic'
+# make install
+</code>
+以上将把 openssl 安装到 /opt/openssl
+接着编译 tinc-1.1pre18
+<code>
+./configure \
+--target=arm-openwrt-linux \
+--host=arm-openwrt-linux \
+--build=x86_64-pc-linux-gnu \
+--prefix=/opt/tinc \
+--with-openssl=/opt/openssl \
+CC=arm-openwrt-linux-gnueabi-gcc \
+CPP='arm-openwrt-linux-gnueabi-gcc -E' \
+CFLAGS='-O2 -pipe -mtune=cortex-a9 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=soft -DPIC -fpic' \
+CPPFLAGS='-I/opt/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-8.4.0_glibc-2.23_eabi/include' \
+LDFLAGS='-Wl,--dynamic-linker=/opt/lib/ld-linux.so.3 -Wl,-rpath=/opt/openssl/lib -Wl,-rpath=/opt/lib -L/opt/Entware/staging_dir/toolchain-arm_cortex-a9_gcc-8.4.0_glibc-2.23_eabi/lib'
 </code>